January 18, 2018

Increasing productivity of existing bitumen-emulsion plants

Dear Valued Customers! We would like to remind that GlobeCore provides an opportunity to increase the existing bitumen-emulsion plants performance by introducing an additional block. It has the potential benefits in the form of efficiency and functionality.

It allows to raise the productivity of both GlobeCore plants and plants of other manufacturers. One such project was implemented in Thailand, where the existing equipment was complemented with a...

September 15, 2017

A new plant, adapted for shipping in containers by road and sea, has been developed

The engineering department of our company developed a new design of bitumen plant UMB-6 with a capacity of 6 m3 / h.

This type of equipment is very popular, due to the wide range of bitumen applications (roofing and waterproofing, road works, pipeline protection, lining of canals, etc.).  It  improves the properties of bitumen after modification (prolonged life of coating, improved resistance in a range of operational...

September 4, 2017

Commissioning of a UVB-10PK Bitumen Complex in Ghana

A team of GlobeCore specialists visited Accra (Ghana) in August for commissioning and personnel training.

This time, the team commissioned a UVB-10PK bitumen complex, which consits of several sections, each with its own function:

bitumen input; preparation of bitumen; production of all emulsion types; emulsion storage and output.

Operating such equipment optimizes motorway repairs and construction, since some of the operations can be performed at the same time (e.g. accepting...

November 5, 2016

GlobeCore at the International Bitumen Technology Conference in Sri Lanka

GlobeCore representatives took part in the 8th “Bitumen & Asphalt Conference & Exhibition” international conference in Sri Lanka on 1-3 November.

Here is a brief photo report from the conference.


September 5, 2016

Modernization of the UVB-2 unit (20 m³/h) reduced the set up time

GlobeCore anticipates the needs and preferences of its customers – by producing new equipment and upgrading the existing ones. The latest achievement is– an upgrade of bitumen modification plant UMBP-22.

Despite the cost of modified bitumen being more expensive than the cost of usual bitumen its use is practical for the following reasons:

temperature resistance of road surface; resistance to cracking of road surface; reduce surface loads; considerable life extension of...

July 12, 2016

Improving polymerization of bitumen in the SBM-30 storage tank

GlobeСore engineering department completed upgrading  and improving modified bitumen storage tank SBM-30.

The result of this meticulous work is a production of the first two units of upgraded equipment.

The updated model of storage tank SBM-30 has following features:

hollow part of the bottom now has a 200 mm heat insulation; overall length is now l 650 mm less; tank operational capacity increased from 27 to 30 m3; new roof...

May 5, 2016

The RBE-0.2 mobile bitumen emulsion sprayer unit is a new model for product range expansion

GlobeCore is delighted to inform of yet another expansion of products.

From today representatives of road works companies can purchase RBE-0,2 bitumen sprayers. This bitumen spraying equipment is designed for covering surface with bitumen emulsion by spraying it during asphalt repairs and maintenance of sections of small road and other objects of road facilities. In particular RBE 0,2 is indispensable at construction and repairs of parking zones,...

April 30, 2016

Commissioning bitumen emulsion equipment in Zimbabwe

In the end of April 2016 a bitumen emulsion production commissioning ceremony was held in Zimbabwe.

This event was so important that the minister of transport and infrastructure, Mr. Yorama Gumbo, attended it personally. The base of the new production line is a UVB-1 unit produced by GlobeCore. The plant will produce up to 10 tons of bitumen emulsion per hour. The total estimated project cost is...

April 30, 2016

Roads of Ghana are Built and Repaired with GlobeCore Equipment

In April, representatives of our company visited Ghana to access the current state of a UVB-1 plant.

This equipment was sold in 2012 and has since produced 40000 m3 of bitumen emulsion. This material is in demand in Ghana, as this country is badly in need of building new and repairing the existing automobile roads.

Application of bitumen emulsions in road construction industry boosts the quality...

April 8, 2016

GlobeCore opens a new service center in US

GlobeCore  announced the opening of a new service centre in US.

The address of the new location is 1750-H Dickinson Ave (FM 1266) Dickinson, TX, 77539.

T: + 1-713-429-1616 and + 1-713-828-7877.

Our other offices and service centers are available in the section “Contacts”.


December 10, 2015

GlobeCore Presents Equipment in Bulgaria

In October 8-24, 2015 representatives of road building industry and other interested companies of Bulgaria could attend presentations of GlobeCore equipment.

These events took place in Sofia, Plovdiv, Ruse, Blagoevgrad and other cities. Representatives of GlobeCore presented to participants information both on company GlobeCore and on produced equipment: plans for production of bitumen emulsion and (UVB-1 series), plants for bitumen modification with polymers (UVB-2 series),  as well as laboratory equipment.

Interest of...

October 21, 2014

The Historical Commissioning of Bitumen Emulsion Plant in Tanzania

On October 4, 2014, in  Dar es Salaam (the United republic of Tanzania) there was held an official opening of the bitumen emulsion production plant.

The historical aspect of this event is that it is the first bitumen emulsion plant in this country. And we are happy to inform that it was manufactured by GlobeCore.

This event was visited by the vice-president of the rural and urban road construction of the United...

June 30, 2014

Running Bitumen Emulsion Equipment

On 30 June 2014, GlobeCore employees traveled to European country and conducted a successful launch and commissioning of GlobeCore model UVB-1 intended for the production of bitumen emulsion.

Bitumen emulsion equipment manufactured and supplied by GlobeCore, is increasingly in demand.  This is the result of a wide spread acceptance of and demand for the cold process mix in preparation for the pavement, repair, and construction of roadways.

If you are a company...

June 27, 2014

Bitumen emulsion water phase production unit commissioned in Thailand

27 June 2014: all commissioning work for supply and preparation of water bitumen emulsion in Thailand were completed.

GlobeCore specialists commissioned UVB type unit for bitumen emulsion water phase production and trained the customer’s personnel.

Preparation of the water phase is one of the stages in the production of bitumen emulsions. Apart from the plants made individually for retrofitting into existing process lines, the company also produces UVB-1 units for production of...

June 5, 2014

GlobeCore office in the United Arab Emirates has moved!

Dear customers! On June 5, 2014 our office in the United Arab Emirates moved. Now you can find us at:

Globecore FZE
Al Jazeera Al Hamra, P.O. Box 31291,
RAKIA Business Centre 5, Building No. A4, Office No. 205
Ras Al Khaimah, United Arab Emirates.

We are waiting for you! As before, our managers will be glad to talk to you and help you to choose the most efficient equipment or...

May 8, 2014

A UVB-2 plant successfully commissioned in Vietnam

Commissioning of the plant was completed on 8 May. The UVB-2 unit (22 m3/hour production capacity) was supplied to one of the country’s construction companies to modify bitumen with polymer.

Modified bitumen, produced with GlobeCore’s UVB plant, is used in repair and construction of roads, bridges and overpasses.

Such equipment is important for facilities, engaged in repair and production of asphalt road top, water-proofing of buildings and soft roofing.


February 8, 2014

The UVB-1 Unit Started to Produce Bitumen Emulsion in Azerbaijan

In February 2014, GlobeCore’s employees visited Baku (Azerbaijan). 

The aim of the visit was to commission the UVB-1M unit (capacity 2 m3/h), delivered there before. It is designed to produce bitumen emulsions.All works planned were completed in time that allowed the representatives of Azerbaijan to start producing bitumen emulsions that fully comply with the world quality standards.

The application areas of bitumen emulsions include:

surface treatment. The main benefit of bitumen emulsion is...

обновлено: July 13, 2017 автором: globecore